- Out-of-Stock
Radio-controlled model of a working ship with salvage crane to 1:25
In many harbours of the world you will find examples of the full-size Paula. These industrious vessels are constantly shunting in and out of port to carry out their work in the coastal regions, around the estuaries of large rivers and in the harbour approaches. Manoeuvrable and very fast for their size, these working ships are employed for all manner of tasks. Amongst their duties are retrieving and laying sea warnings and markers, clearing away minor obstacles in shipping lanes and transporting special equipment required for marine research.
This wide-ranging versatility gives the imaginative modeller almost unlimited scope for completing and operating the boat.
The Paula III is the ideal model for the beginner and advanced model builder alike, but is likely to appeal to the traditional modeller who enjoys „real“ construction work. We recommend the use of a lead-acid battery which gives extremely long running times. The salvage crane can lower various loads over the model‘s stern and retrieve them again.
Crew figures and buoy set not included in the kit.
Set contents
• Vacuum-moulded plastic hull and deck
• Vacuum-moulded deck superstructure formed in clear material; windows do not need to be cut out separately
• Die-cut internal hull fittings
• Complete rudder system
• Stern tube, shaft and propeller
• Shaft coupling
• All parts for the salvage crane
• Decal sheet
• Building instructions and plan
• Complete fittings set
Specification:
Length approx. 710 mm
Width approx 215 mm
Total displacement approx. 2500 g
Scale 1:25
RC functions
Rudder, Motor control, Auxiliary working systems
Paula
The Tug Boat Neptun is a remote controlled model of a tug boat in 1:50 scale as they are still found in many ports
LF 4x6 Two Jaw D20L25 Aluminium Flexible Shaft Coupling Motor
LF 5x6 Two Jaw D20L25 Aluminium Flexible Shaft Coupling Motor
CNC Motor Jaw Shaft Coupler 4mm To 5mm Flexible 18x25mm
Nylon Snap-Click style clevis 2x8x23mm (10pc)
Raboesch Brass Propeller 156 series 45mm L + R
3.17 / 5 mm Motor Drive Brass Shaft Coupling
RC Boat High Quality Shaft Kit 2.35mm Flexible Axle with 3mm Hard Axle
CNC Motor Jaw Shaft Coupler 5mm To 5mm Flexible 18x25mm
3 Blades 26mm Propeller 2mm Shaft R + L Set
Brass Propeller Metric 156 series 50mm L + R
60A 3S Waterproof Brushed ESC with Fan 5V 3A BEC
1:100 Halcon Wooden Sailing Boat Model DIY Kit Ship Assembly
3-Blade Propeller 52mm Pitch 1.4 for 4.8mm Shaft RC Boat
Mounting Bracket DC Motor 555 500 Series Motor Base
Rigging Thread Diameter : 2.00 mm Length : 5 m Color : Natural
Hobbywing Skywalker 60A ESC Speed Controler With UBEC
This is a very neat device for securing your models hatches. This latch is spring return so once latched your canopy stays put!
Water Outlet
Suits 4mm hose and requires a 6mm diameter hole to pass through.
This is a very neat device for securing your models hatches. This latch is spring return so once latched your canopy stays put!
Turnigy D3530/14 1100KV Brushless Outrunner Motor
Nylon Steering Rudder for RC Boat Height 36mm 180 degrees arm
3-Blade Propeller R+L 36mm Pitch 1.4 for 4.0mm Shaft RC Boat
Aluminum M3 Link Rod End Ball Joint CW CCW for RC Car Crawler Buggy
3-Blade Propeller 55mm Pitch 86 for 4.8mm Shaft RC Boat
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Radio-controlled model of a working ship with salvage crane to 1:25